Xone 42 manual

William Grant's Ownd. Allen heath 42 manual. This manual comes under the category Not categorized and has been rated by 1 people with an average of a This manual is available in the following languages: English.

Ask your question here. The Xone k2 has a very good built quality as you expect from Allen Heath. Page 2: Warranty EMC standards. Safety Sheet Important!

Read this sheet before starting. Retain for future reference. To ensure that you get the maximum benefit from the unit please spare a few minutes familiarizing yourself with the controls and setup procedures outlined in this user guide. For further information please refer to the additional information available on our web site, or contact our technical support team.

Page 6: Introduction The mixer incorporates a USB audio interface for easy connection to a computer and integration of digi- tal media. It can be used to play back music files from a laptop and to record mixes from the Xone, or when used with appropriate software, as a digital DJ effects unit that can be patched into the X:FX.

Page 7: Specifications The console is fitted with rubber feet for desktop operation. The USB connection is used to send and receive audio data between the Xone and a connected computer.

Use a standard type A to B lead to connect to your computer. Page 10 Press the switch again to deselect cue. When selected, the green LED indicator will illuminate. Page 12 right side of the cross-fader. A bi-colour LED indicator illuminates either green X or red Y to show which side of the cross-fader has been selected. Page Filters Section Turns on the band pass bell shaped filter slope. The light ring around the button illuminates when selected. LPF Button Turns on the low pass treble cut filter slope.

This is really the highlight of this mixer in my opinion. If you're considering adding an external effects unit, the Xone 42 is the way to go.

My mixer came from Australia; it came with a V plug which I was totally bummed about. I ran to Radio Shack and bought a step up converter and a plug converter to go from the three pronged cable it came with to a 2 pin EU socket. I brought it home and was concerned about grounding going from three pin to a two pin EU. I don't know anything about EU sockets, so forgive me! As I was scanning the manual it's stated that the mixer will take anything from V to V without changing dip settings or fuses.

So I grabbed my guitar amp's cable, plugged it in, and I was off and running with no converters or changing anything on the mixer.

This is a pretty cool feature having blown up other electrical devices when I've forgotten to change it from to It's grey, actually a darker grey than what the picture looks like They didn't spend much money trying to make this thing look sexy though.

The knobs are all rubber coated giving them a really nice feel and the pots are really tight and smooth, I expected nothing less here. The 3 band eq is full kill which is nice. The faders have plastic handles on them, which is not uncommon. They are a nice shape though and feel totally comfortable and are very secure on the faders. I like cutting and am pretty rough on fader knobs, these seem to be connected better than the Pioneers, but this mixer is brand new and I'm being easy on it.